Knife STYX

Walking saber model 24/27 The Pattern 24/27 Walking Sabre is a replica of the walking sabre used by the corps of sergeant guards and senior sergeant guards (pattern 24/27). It consists of a blade, handle, and sheath. Key features of the knife: - The blade is made of wedge-shaped cross-section steel and is slightly curved along its entire length, gradually tapering towards the tip. The blade has a tang at the top which connects it to the handle. The axis of the tang is offset relative to the edge to facilitate easy weapon handling. The blade length (without handle) is 750 mm, width 23 mm, and thickness 5 mm. There are no decorative elements (inscriptions, linden branches, etc.) on the blade. The blade is hardened and then tempered to a hardness of 48 HRc. - The handle consists of a grip with a ring, back of the grip, guard, and handle screw. - The grip is made of beech wood, hollowed inside for the tang and covered with goatskin. The grip is further decorated with wire braided into a chain. The upper end of the grip is widened into a pommel, and ribs are placed below the pommel downwards for a comfortable hold. A ring fits tightly to the grip below the last lower rib. The back covers the rear side and pommel of the grip. At the top, it is notched for the guard pommel. - The guard of this sabre is nickel-plated. On the side facing the body, it is widened and arched, with the arched part cut out in two places forming two arched bars (attachment straps). The guard narrows towards a bow fastened at the end of the tang with a screw. The opposite end of the guard is curled towards the blade and filled in. The outer surface of the guard is decorated at the top with a stylized linden branch with the middle state emblem in the center. The remaining outer surface of the guard is embellished with fine beading. The inner side of the guard is smooth. The handle screw is screwed from above into the back of the handle. - The sheath is made of steel sheet and shaped to fit the shape of the sabre. The sheath is bright nickel-plated. The sheath includes these components: throat, upper and lower rings, and tip. The throat is inserted into the sheath opening and internally extends into two spring leaves; beneath these leaves, two wooden liners are inserted. The springs and liners hold the blade in the sheath. The upper and lower rings are slid onto the sheath for securing the sabre to a belt. The upper ring has an elongated eye on the inner side, tilted upwards toward the sabre edge. The lower ring has an oval loop on the back, aligned with the sheath. The bottom split end of the sheath is soldered with a tip. The above description corresponds to the standard manufacturing version. Custom modifications and changes can be made on request regarding dimensions, materials, decoration, surface treatment, shape of individual parts, etc. The price depends on the individual customer’s requirements (size, material, ornaments, type of plating, inscriptions, etc.) and is always determined based on an agreement with the customer.ParametersPackage weight, kg0.37Blade length750 mmBlade width23 mmBlade thickness5 mmBlade sharpening typebevel cutBlade tip shapedrop pointNumber of knife parts1Mechanism typeSolid..

Knife REPETITOR REPETITOR Knife This is a numbered limited edition commemorating the participation of Czech soldiers in Balkan missions UNPROFOR, UNCRO, IFOR, and SFOR since 1992. It bears, upon the proposal of Chief of the General Staff Aleš Opata, the name of checkpoint T 23 - Repetitor, where during the fulfillment of UNPROFOR mission tasks in August 1995, two Czech soldiers died: Luděk Zeman Petr Valeš Its design concept is a reminiscence of the famous bayonet for the vz. 58 assault rifle. As with the previous knife project Storm, the designer Major Roman Hippík was inspired by a cold weapon that has been part of our army’s arsenal for several decades and is connected with its history. In this case, it is the bayonet for the vz. 58 assault rifle, familiar to almost all who served in the army, whether as conscripts or professional soldiers. War Veteran Project This is a joint initiative by Mikov and the Military Solidarity Fund. Its goal is to connect the memory of soldiers' heroism with concrete help for those in need. From each REPETITOR knife sold, CZK 300 will be donated to the Military Solidarity Fund. Technical specifications of the REPETITOR knife Integral fixed blade knife with red handle scales made of Micarta material The blade features a central tip, a lower edge, an upper false edge, and relief grooves Blade surface treated steel Böhler N 690 with Ceracot cobalt coating Micarta handle scales secured to the tang by two hex socket screws The knife has a single-sided lower guard and a thumb rest roughening on the blade spine Circular guard with a hole for attaching a cord and seven facets Marks of the creator, manufacturer, serial number, and year of manufacture laser-engraved Sheath and accessories Very lightweight and compact laminated Cordura sheath with a plastic insert that locks the knife in place The knife handle is fixed to the suspension strap by two hook-and-loop fastened bands with press studs Sheath surface of the same material as army equipment components The sheath can be attached to a belt in multiple ways and to MOLLE webbing The front face of the sheath bears at the bottom the heraldic emblem used on Czechoslovak Army military equipment during the Balkan missions The packaging includes the original sheath, a certificate of the CZK 300 contribution to the Military Solidarity Fund, an information brochure about Operation Desert Storm and the Repetitor knife, paracord, and a sticker A brief presentation of the Repetitor knife features and a comprehensive overview of possible carrying options can be found in this video:ParametersPackage weight, kg0.35Knife length275 mmBlade length149 mmBlade width24 mmBlade thickness4.9 mmBlade hardness58–60 HRcHandle materialMicartaNumber of knife parts1Sheathnylon casePackagingPaper boxColor designredBlade finishCeracote Cobalt..

DIVER Black Leather Sheath AZ 07 SHEATH leather DIVER AZ 07 is highly valued for its craftsmanship quality and distinctive design. The sheath is designed for the Diver bayonet. Main features Material: Premium cowhide leather, ensuring long durability and resistance to wear.Construction: Strong stitching and ergonomic shape precisely matching the knife dimensions.The back of the sheath is equipped with a belt loop for convenient attachment to a belt.ParametersPackage weight, kg0.1Sheathleather case..

FLEX Electrician knife fixed 1-piece 335-OH-8 Electrician knife 335-OH-8 is a specialized tool designed for safe and efficient work with cables and wires. Thanks to its robust construction and specific blade shape, it is a popular choice not only among professional electricians but also in home workshops. This knife is primarily intended for stripping cables and removing insulation from wires. Unlike ordinary knives, it has a modified blade that minimizes the risk of damaging the copper or aluminum conductor core when cutting through the outer insulation. Key features of the knife: - Blade made of stainless steel 420 (52-55 HRc) – trailing point, - Handle scales – durable plastic, providing a firm and secure grip even under greater pressure. The plastic surface is usually textured to prevent slipping from the hand, for example when wet or covered with insulating gel. The blade of the knife is trailing-point and made of high-quality stainless steel type 420 with hardness of 52-55 HRc. It is equipped with a notch or specific grind at the base which serves for safe stripping of insulation from wires of various cross-sections. The blade tip is modified to allow easy work in the depth of electrical installation boxes. The cutting edge is located on the underside of the blade and ends with a sharp tip that offers ripping capabilities. The handle scale is made of high-quality and durable plastic with an ergonomic shape that fits the gripping hand for comfortable cutting without unnecessary pressure points or calluses. The front side includes a guard-shaped cutout that prevents the hand from slipping and potential injury. Cleaning: After working with sticky insulation or in dusty environments, clean the knife and lightly lubricate the blade with tool oil.ParametersPackage weight, kg0.06Knife length200 mmBlade length80 mmBlade width20 mmBlade thickness1.8 mmBlade hardness52–55 HRcBlade sharpening typebevel cutBlade tip shapeSpey PointHandle materialplasticNumber of knife parts1Sheathwithout a caseMechanism typeSolidPackagingPVC packaging..

Product Description Knife for Active Reserves AZD Knife is designed for maximum durability in extreme conditions. It is not a multi-tool knife for slicing sausages, but a pure combat knife and rescue tool. Blade is made of high-quality stainless steel 14260 with a hardness of 58 HRc and a DLC surface treatment has aggressive notches on the spine for cutting ropes, straps, or plastic bindings Construction full-tang construction - the steel runs through the entire length of the handle, ensuring the knife will not break even when used for prying handle is made of leather rings prominent double-sided guard protects the hand from slipping onto the blade during strong stabbing the pommel of the handle is typically finished with a steel tip (pear-shaped), used for breaking glass or as a striking surface Purpose The knife is not intended for the general public and is manufactured exclusively for members of unit 121, the Guard Company of the Active Reserves of Central Bohemia. Specifications ..