Walking saber model 24/27

Walking saber model 24/27

The Pattern 24/27 Walking Sabre is a replica of the walking sabre used by the corps of sergeant guards and senior sergeant guards (pattern 24/27). It consists of a blade, handle, and sheath. Key features of the knife: - The blade is made of wedge-shaped cross-section steel and is slightly curved along its entire length, gradually tapering towards the tip. The blade has a tang at the top which connects it to the handle. The axis of the tang is offset relative to the edge to facilitate easy weapon handling. The blade length (without handle) is 750 mm, width 23 mm, and thickness 5 mm. There are no decorative elements (inscriptions, linden branches, etc.) on the blade. The blade is hardened and then tempered to a hardness of 48 HRc. - The handle consists of a grip with a ring, back of the grip, guard, and handle screw. - The grip is made of beech wood, hollowed inside for the tang and covered with goatskin. The grip is further decorated with wire braided into a chain. The upper end of the grip is widened into a pommel, and ribs are placed below the pommel downwards for a comfortable hold. A ring fits tightly to the grip below the last lower rib. The back covers the rear side and pommel of the grip. At the top, it is notched for the guard pommel. - The guard of this sabre is nickel-plated. On the side facing the body, it is widened and arched, with the arched part cut out in two places forming two arched bars (attachment straps). The guard narrows towards a bow fastened at the end of the tang with a screw. The opposite end of the guard is curled towards the blade and filled in. The outer surface of the guard is decorated at the top with a stylized linden branch with the middle state emblem in the center. The remaining outer surface of the guard is embellished with fine beading. The inner side of the guard is smooth. The handle screw is screwed from above into the back of the handle. - The sheath is made of steel sheet and shaped to fit the shape of the sabre. The sheath is bright nickel-plated. The sheath includes these components: throat, upper and lower rings, and tip. The throat is inserted into the sheath opening and internally extends into two spring leaves; beneath these leaves, two wooden liners are inserted. The springs and liners hold the blade in the sheath. The upper and lower rings are slid onto the sheath for securing the sabre to a belt. The upper ring has an elongated eye on the inner side, tilted upwards toward the sabre edge. The lower ring has an oval loop on the back, aligned with the sheath. The bottom split end of the sheath is soldered with a tip. The above description corresponds to the standard manufacturing version. Custom modifications and changes can be made on request regarding dimensions, materials, decoration, surface treatment, shape of individual parts, etc. The price depends on the individual customer’s requirements (size, material, ornaments, type of plating, inscriptions, etc.) and is always determined based on an agreement with the customer.

Parameters

Package weight, kg	0.37
Blade length	750 mm
Blade width	23 mm
Blade thickness	5 mm
Blade sharpening type	bevel cut
Blade tip shape	drop point
Number of knife parts	1
Mechanism type	Solid