CAESAR MEČÍK decorative hunting knife 700-NK-24

Walking saber model 24/27 The Pattern 24/27 Walking Sabre is a replica of the walking sabre used by the corps of sergeant guards and senior sergeant guards (pattern 24/27). It consists of a blade, handle, and sheath. Key features of the knife: - The blade is made of wedge-shaped cross-section steel and is slightly curved along its entire length, gradually tapering towards the tip. The blade has a tang at the top which connects it to the handle. The axis of the tang is offset relative to the edge to facilitate easy weapon handling. The blade length (without handle) is 750 mm, width 23 mm, and thickness 5 mm. There are no decorative elements (inscriptions, linden branches, etc.) on the blade. The blade is hardened and then tempered to a hardness of 48 HRc. - The handle consists of a grip with a ring, back of the grip, guard, and handle screw. - The grip is made of beech wood, hollowed inside for the tang and covered with goatskin. The grip is further decorated with wire braided into a chain. The upper end of the grip is widened into a pommel, and ribs are placed below the pommel downwards for a comfortable hold. A ring fits tightly to the grip below the last lower rib. The back covers the rear side and pommel of the grip. At the top, it is notched for the guard pommel. - The guard of this sabre is nickel-plated. On the side facing the body, it is widened and arched, with the arched part cut out in two places forming two arched bars (attachment straps). The guard narrows towards a bow fastened at the end of the tang with a screw. The opposite end of the guard is curled towards the blade and filled in. The outer surface of the guard is decorated at the top with a stylized linden branch with the middle state emblem in the center. The remaining outer surface of the guard is embellished with fine beading. The inner side of the guard is smooth. The handle screw is screwed from above into the back of the handle. - The sheath is made of steel sheet and shaped to fit the shape of the sabre. The sheath is bright nickel-plated. The sheath includes these components: throat, upper and lower rings, and tip. The throat is inserted into the sheath opening and internally extends into two spring leaves; beneath these leaves, two wooden liners are inserted. The springs and liners hold the blade in the sheath. The upper and lower rings are slid onto the sheath for securing the sabre to a belt. The upper ring has an elongated eye on the inner side, tilted upwards toward the sabre edge. The lower ring has an oval loop on the back, aligned with the sheath. The bottom split end of the sheath is soldered with a tip. The above description corresponds to the standard manufacturing version. Custom modifications and changes can be made on request regarding dimensions, materials, decoration, surface treatment, shape of individual parts, etc. The price depends on the individual customer’s requirements (size, material, ornaments, type of plating, inscriptions, etc.) and is always determined based on an agreement with the customer.ParametersPackage weight, kg0.37Blade length750 mmBlade width23 mmBlade thickness5 mmBlade sharpening typebevel cutBlade tip shapedrop pointNumber of knife parts1Mechanism typeSolid..

Pocket folding knife RYBIČKA decorated Rybička with decorative motif is one of the classic pocket folding knives. The handle scales are printed using UV LED technology, which is why it is classified as a decorative item. Blade is made of high-quality stainless steel type 420 with a hardness of 52-55 HRc. Handle scales of the knife are made of zinc alloy. Rybička is placed in a tin gift box PDK1 and is equipped with a decorative carabiner of various shapes. Handle scales available in designs: CLOWN, PRINCESS, PINK, ICE, DALMATIAN, CAMOUFLAGE, FIRE, DORRIS. Key features of the knife: Blade made of stainless steel 420Handle scales of zinc alloy printed with UV LED printingCarabinerGift boxWarning: Improper handling of the knife may cause scratches or peeling of the printed surface.ParametersPackage weight, kg0.07Knife length78 mmOpen knife length133 mmClosed knife length78 mmBlade length55 mmBlade width11 mmBlade thickness1.5 mmBlade hardness52–55 HRcBlade sharpening typebevel cutBlade tip shapeSpey PointHandle materialzincNumber of knife parts1Sheathwithout a caseMechanism typeFoldingSafety typewithout a fusePackagingGift Tin BoxDesignCamouflage, Clown, Dalmatian, Dorris, Fire, Ice, Pink, Princess..

Leather sheath HUNTER brown - version with 2 tools 230/2 SHEATH leather HUNTER is made from selected cowhide (genuine leather), which develops a unique patina over time. It represents an ideal choice for those seeking a minimalist yet highly durable accessory for their everyday gear. This sheath is designed with a focus on precise craftsmanship and long service life. The sheath is intended for the HUNTER folding knife and can be attached to a belt. Why choose the HUNTER model? Ergonomic design: The shape of the sheath is designed to hold the contents firmly while allowing easy and quick one-handed removal.Durability: Thanks to the use of high-quality leather and careful hand or machine stitching, the sheath withstands demanding outdoor conditions (forest, workshop, construction site).Versatility: Its clean look without unnecessary embellishments suits both outdoor clothing and casual wear.ParametersSheathleather case..

FOXTROT knife Knife FOXTROT is designed as a hybrid between a combat knife and a survival tool: It is the fifth knife of the War Veteran Project, based on a knife originally intended for Czech soldiers deployed in Afghanistan. Designed according to the requirements of units operating under the most demanding combat conditions. Foxtrot combines proven functionality, high durability, and precise craftsmanship. The blade is made from premium N690 steel, known for its toughness and reliability: DLC surface finish for extreme resistance in harsh conditions. Ergonomic leather handle: For a firm grip and comfort during prolonged use. Includes a leather sheath with double security for safe carrying. Unique marking and project inspiration: Each piece is marked with a unique serial number, maker’s marks, and year of manufacture. The project is inspired by significant events in the history of Czech Army military foreign missions. Each of these events is dedicated to one knife, and part of the sale proceeds is always donated to the Military Solidarity Fund. 300 CZK from the sale of each knife is contributed to the Military Solidarity Fund. ParametersPackage weight, kg0.26Knife length280 mmBlade length150 mmBlade width31 mmBlade thickness4.5 mmBlade hardness58–60 HRcHandle materialleather ringsNumber of knife parts1Sheathleather casePackagingPaper boxBlade finishDLC..