Pocket folding knife KOSTKA

Product Description Knife BISON 2 Knife BISON 2 BISON 2 is a combat knife exclusively designed for members of the Security Information Service (BIS). The blade is made of high-quality Böhler N690 stainless steel with a hardness of 58-60 HRc. The handle is made of G10 material. Key features of the knife: Blade made of Böhler N690 stainless steel G10 handle Kydex sheath The knife is not intended for the general public. Specifications ..

Folding knife ELIPT ELEGANT AND PRACTICAL knife, simply Elipt, is a modern folding knife that represents a significant shift for the brand towards current trends in EDC (everyday carry). The blade is a drop-point with a flat grind made of D2 tool steel with a stonewash finish. This steel has a higher content of chromium and carbon, which gives the blade high wear resistance. Its hardness is 63 HRc. The opening mechanism features a flipper for quick and safe one-handed opening. There is a relief hole on the upper edge of the blade, which facilitates two-handed opening, for example when wearing gloves, making it suitable for both right- and left-handed users. Mechanism and safety: The blade is mounted on ball bearings, ensuring smooth operation even with tightly fastened handle scales without unwanted play. The liner lock blade lock secures the blade in the open position and is suitable for both right- and left-handed users. The ball on the lock serves to lock the blade in the closed position, preventing accidental opening. The handle scales are machined from lightweight and durable duraluminium with an ELOX surface treatment that protects them from weather and scratches. Mounted on steel liners, they have an ergonomic shape for comfortable grip for right- and left-handed users. The construction of the ELIPT knife is robust and sturdy without unwanted play, featuring precise fitting. The knife is equipped with an ambidextrous adjustable belt clip. Key features of the knife: D2 tool steel blade (60-63 HRc) with stonewash finish One-handed opening Handle made of lightweight duraluminium with ELOX surface treatment, ergonomic shape Clip: adjustable belt clip suitable for right- and left-handed users ParametersPackage weight, kg0.25Quantity in package, pcs1Knife length120 mmOpen knife length216 mmClosed knife length120 mmBlade length95 mmBlade width26 mmBlade thickness3.2 mmBlade hardness63 HRcBlade sharpening typebevel cutBlade tip shapedrop pointHandle materialduralumin + anodizedNumber of knife parts1SheathclipMechanism typeFoldingSafety typeliner lockPackagingPaper boxColor designblueBlade finishSTONEWASH..

Walking saber model 24/27 The Pattern 24/27 Walking Sabre is a replica of the walking sabre used by the corps of sergeant guards and senior sergeant guards (pattern 24/27). It consists of a blade, handle, and sheath. Key features of the knife: - The blade is made of wedge-shaped cross-section steel and is slightly curved along its entire length, gradually tapering towards the tip. The blade has a tang at the top which connects it to the handle. The axis of the tang is offset relative to the edge to facilitate easy weapon handling. The blade length (without handle) is 750 mm, width 23 mm, and thickness 5 mm. There are no decorative elements (inscriptions, linden branches, etc.) on the blade. The blade is hardened and then tempered to a hardness of 48 HRc. - The handle consists of a grip with a ring, back of the grip, guard, and handle screw. - The grip is made of beech wood, hollowed inside for the tang and covered with goatskin. The grip is further decorated with wire braided into a chain. The upper end of the grip is widened into a pommel, and ribs are placed below the pommel downwards for a comfortable hold. A ring fits tightly to the grip below the last lower rib. The back covers the rear side and pommel of the grip. At the top, it is notched for the guard pommel. - The guard of this sabre is nickel-plated. On the side facing the body, it is widened and arched, with the arched part cut out in two places forming two arched bars (attachment straps). The guard narrows towards a bow fastened at the end of the tang with a screw. The opposite end of the guard is curled towards the blade and filled in. The outer surface of the guard is decorated at the top with a stylized linden branch with the middle state emblem in the center. The remaining outer surface of the guard is embellished with fine beading. The inner side of the guard is smooth. The handle screw is screwed from above into the back of the handle. - The sheath is made of steel sheet and shaped to fit the shape of the sabre. The sheath is bright nickel-plated. The sheath includes these components: throat, upper and lower rings, and tip. The throat is inserted into the sheath opening and internally extends into two spring leaves; beneath these leaves, two wooden liners are inserted. The springs and liners hold the blade in the sheath. The upper and lower rings are slid onto the sheath for securing the sabre to a belt. The upper ring has an elongated eye on the inner side, tilted upwards toward the sabre edge. The lower ring has an oval loop on the back, aligned with the sheath. The bottom split end of the sheath is soldered with a tip. The above description corresponds to the standard manufacturing version. Custom modifications and changes can be made on request regarding dimensions, materials, decoration, surface treatment, shape of individual parts, etc. The price depends on the individual customer’s requirements (size, material, ornaments, type of plating, inscriptions, etc.) and is always determined based on an agreement with the customer.ParametersPackage weight, kg0.37Blade length750 mmBlade width23 mmBlade thickness5 mmBlade sharpening typebevel cutBlade tip shapedrop pointNumber of knife parts1Mechanism typeSolid..