Recessed circular saw FESTOOL TS 60 KEBQ-Plus Master Edition (577847)

Circular plunge saw TS 60 KEBQ-Plus Master Edition; 1500 W; disk 168x1.8x1.2x20 mm; 3000-6800 rpm; slope -1° - 47°; cutting depth 0-62 mm; EC-TEC brushless motor; kickbackstop safety system; FastFix spindle stopper

Characteristics

• Power 1 500 W
  
• The number of idling revolutions is 3,000 - 6,800 rpm
• The diameter of the saw blade is 168.00 mm
• Angle range -1 - 47°
• Cutting depth 0 - 62 mm
• The depth of sawing at a disc inclination of 45°45 mm
• Ø of the dust removal connector 27/36 mm
• The length of the cable is 4.00 m
• The weight of the tool without equipment is 4.70 kg
• Transport weight with accessories 8.08 kg
• Drive type Network

Delivery set

• hex key SW 5
  
• fine-tooth saw blade HW 168x1.8x20 WD42
• anti-roll bar
• network cable with plug it connector (4 m)
• systainer SYS3 M 337
• viewing window

Specialization

• Precise cuts in workpieces up to 60 mm thick.
  
• Facing interior doors - a guide bar with a plunge saw
• Cutting holes in doors and kitchen countertops
• Cutting board materials (chipboard; veneered and plastic-coated panels)
• Cross cutting with FSK miter saw (floor panels, trim products)
• Cutting expansion joints in the parquet and facing the ceiling covering close to the wall.

One step ahead. The standard in sawing.

Festool plunge saws have been setting the tone in the sawing industry for decades. TS 60 K gives it new power. The unique kickback stop system KickbackStop works instantly, protecting your hands and the workpiece. This saw has the widest range of applications thanks to a cutting depth of up to 60 mm and the possibility of use with the entire range of Festool sawing accessories. Excellent results are guaranteed even when cutting at an angle in thick workpieces. Now you have a unique opportunity to combine the TS 60 K with a butt bar. Yes, in just two steps you get an easy-to-use system for precise cuts at a given angle. The new EC-TEC brushless electric motor makes the compact plunge saw extremely reliable and powerful. It cuts the material like butter and combines precision, flexibility and high quality of processing while increasing safety. Saw TS 60 K: world leader!

• Safer: the unique KickbackStop system reduces the risk of injury when kicking back during sawing or when the blade plunges into the workpiece
  
• Cuts deeper: the cutting depth is greater than the TS 55 F saw of comparable size and weight
• Versatility: the possibility of combining with popular guide bars, now including FSK butt bars
• Consistency: the EC-TEC electric motor in combination with a thin saw blade ensures fast work with lower effort to direct the tool
• Precise: simple execution of neat, precisely reproducible cuts at an angle from -1 ° to 47 °
• Very convenient: the FastFix spindle stop and compact design make it easy to change the saw blade
• Excellent control: a good overview of the disc thanks to the transparent, sliding viewing window.